Exported static report · run 32ed89f6-ea13-40df-b5f2-8c75687c9e48 · selected telemetry sample shown below. Replay requires the matching browser-local record.
Run 32ed89f6-ea13-40df-b5f2-8c75687c9e48 / SC-DC-01 · Meridian
Standard survey
The flagship sortie: 1.5 laps of a 20×40 m inspection loop, 12 scan stations, full hull sweep of the in-plane faces.
Run overview
Started 9/16/2026, 2:44:09 PM
Ended 9/16/2026, 2:44:10 PM
Recorded end: T+45:54 · 60× simulation time
Revision: resident-reports-v1 (base 3e194d6)
Mission: standard-survey · model: gateway
Scenario: fault
Altitude: 550000 m · mean motion: 0.00109482 rad/s
Personal browser simulation. Relative translation uses the existing linear Clohessy–Wiltshire model around a circular 550 km orbit. Docking procedures and attitude are scripted/display choreography. Imagery is synthetic; the reference is a pristine render at the same pose, not a measured prior sortie. Pixel differences detect seeded image changes. Rendering scale and NASA host geometry are illustrative. No flight readiness, real mission safety or inspection accuracy is established.
Exception / T+16:24
Abort disposition
Injected manifold B thruster fault during SEPARATION. Natural departure drift; no burn.
Model-predicted minimum range: 20.9 m; modeled keep-out: 15.0 m. Final recorded range: 150.7 m.
Nominal actions after the trigger were cancelled. Departure drift ends this simulated run; vehicle recovery is not modeled. These values describe this model and configuration, not a safety certification.
Plan versus execution
Shared simulation clock. “Executed” means the scripted step ran in this model; it does not describe a physical spacecraft.
| Phase / planned start | Initial planned action | Disposition | Evidence |
|---|---|---|---|
| DOCKED T+00:00 | Coast | Executed | |
| SEPARATION T+02:00 | spring release (2 cm/s) | Interrupted | |
| TRANSFER T+17:00 | burn: loop transfer (dv 34 mm/s) | Skipped | No execution |
| INSPECT T+40:54 | burn: loop insertion (dv 14 mm/s) | Skipped | No execution |
| RETURN T+184:23 | burn: return to hold (dv 12 mm/s) | Skipped | No execution |
| APPROACH T+208:18 | burn: hold acquired (dv 12 mm/s) | Skipped | No execution |
| APPROACH T+210:18 | burn: corridor hop (dv 18 mm/s) | Skipped | No execution |
| APPROACH T+224:38 | gate: go for capture | Skipped | No execution |
| APPROACH T+225:38 | burn: final approach (dv 50 mm/s) | Skipped | No execution |
| APPROACH T+228:31 | terminal glide (1.5 cm/s closing) | Skipped | No execution |
| CAPTURED T+228:57 | soft capture (closing 1.5 cm/s) | Skipped | No execution |
Evidence, in context
Select an event to locate the nearest captured telemetry sample and scan. Plot: Hill radial x / along-track y, meters; cross-track position is listed below. Dashed: initial plan. Amber: recorded execution samples (gaps are connected, not resimulated).
Velocity [x,y,z]: 0.00000, 0.00000, 0.00000 m/s
Range: 7.000 m · Δv: 0.00 mm/s
T+00:12 · DRONE: pre-departure checks complete
T+00:30 · DRONE: cold-gas manifolds pressurized
T+00:45 · HOST: umbilical demated
T+00:55 · HOST: berth carriage extending
T+01:18 · HOST: carriage at release position
T+01:35 · HOST: capture petals released
T+01:50 · HOST: GO for departure
T+02:00 · spring release (2 cm/s)
T+16:24 · THRUSTER FAULT INJECTED — manifold B pressure loss
T+16:44 · autonomy: NO BURN REQUIRED — natural drift is already a safe departure (min range 21 m)
T+26:24 · drift-away nominal — all actuation assumed lost
T+45:54 · Abort complete — simulated departure drift; recovery not modeled
No imagery captured in this run.
Inspection findings
0 of 12 planned stations captured. Missing scans are not clear findings. Reference imagery is a pristine synthetic render at the same pose. Red boxes are pixel-difference detections, not component diagnoses. Review notes are editable and separate from frozen run evidence.
No detected findings in captured images. This does not establish full inspection coverage.
Evidence provenance
NASA host models and Blue Marble texture; RID-1 procedural vehicle from this project. Host models are visual stand-ins. Synthetic inspection pairs rendered by the existing scan camera and compared by a deterministic pixel detector. Asset provenance and credits. Telemetry is sampled at approximately 10 simulation-second intervals and phase boundaries; timestamps show actual available samples.
Frozen initial configuration and plan
{
"config": {
"scenario": "fault",
"fault_at_s": 984,
"timescale": 60,
"altitude_m": 550000,
"n_rad_s": 0.0010948237877012287,
"anomaly": {
"present": true,
"panel": "radiator-2"
}
},
"plan": {
"type": "plan",
"run_id": "32ed89f6-ea13-40df-b5f2-8c75687c9e48",
"asset": "sc-dc-01",
"mission": "standard-survey",
"label": "Standard survey",
"timescale": 60,
"n_rad_s": 0.0010948237877012287,
"duration_s": 13857.669919903823,
"total_dv_mps": 0.21323,
"segments": [
{
"phase": "DOCKED",
"t0_s": 0,
"duration_s": 120,
"dv_mps": 0,
"dv_vec_mps": [
0,
0,
0
],
"event": null
},
{
"phase": "SEPARATION",
"t0_s": 120,
"duration_s": 900,
"dv_mps": 0.02,
"dv_vec_mps": [
0,
-0.02,
0
],
"event": "spring release (2 cm/s)"
},
{
"phase": "TRANSFER",
"t0_s": 1020,
"duration_s": 1434.7,
"dv_mps": 0.03422,
"dv_vec_mps": [
0.03037,
0.01374,
-0.00774
],
"event": "burn: loop transfer (dv 34 mm/s)"
},
{
"phase": "INSPECT",
"t0_s": 2454.7,
"duration_s": 8608.5,
"dv_mps": 0.01418,
"dv_vec_mps": [
0.0101,
0.00626,
0.00774
],
"event": "burn: loop insertion (dv 14 mm/s)"
},
{
"phase": "RETURN",
"t0_s": 11063.2,
"duration_s": 1434.7,
"dv_mps": 0.01196,
"dv_vec_mps": [
-0.00221,
0.00885,
0.00774
],
"event": "burn: return to hold (dv 12 mm/s)"
},
{
"phase": "APPROACH",
"t0_s": 12498,
"duration_s": 120,
"dv_mps": 0.01196,
"dv_vec_mps": [
-0.00221,
-0.00885,
0.00774
],
"event": "burn: hold acquired (dv 12 mm/s)"
},
{
"phase": "APPROACH",
"t0_s": 12618,
"duration_s": 860.8,
"dv_mps": 0.01752,
"dv_vec_mps": [
-0.01251,
0.01227,
0
],
"event": "burn: corridor hop (dv 18 mm/s)"
},
{
"phase": "APPROACH",
"t0_s": 13478.8,
"duration_s": 60,
"dv_mps": 0.01752,
"dv_vec_mps": [
-0.01251,
-0.01227,
0
],
"event": "gate: go for capture"
},
{
"phase": "APPROACH",
"t0_s": 13538.8,
"duration_s": 172.2,
"dv_mps": 0.05024,
"dv_vec_mps": [
-0.00933,
0.04936,
0
],
"event": "burn: final approach (dv 50 mm/s)"
},
{
"phase": "APPROACH",
"t0_s": 13711,
"duration_s": 26.7,
"dv_mps": 0.03561,
"dv_vec_mps": [
-0.00933,
-0.03436,
0
],
"event": "terminal glide (1.5 cm/s closing)"
},
{
"phase": "CAPTURED",
"t0_s": 13737.7,
"duration_s": 120,
"dv_mps": 0,
"dv_vec_mps": [
0,
0,
0
],
"event": "soft capture (closing 1.5 cm/s)"
}
],
"events": [
{
"t_s": 12,
"label": "DRONE: pre-departure checks complete"
},
{
"t_s": 30,
"label": "DRONE: cold-gas manifolds pressurized"
},
{
"t_s": 45,
"label": "HOST: umbilical demated"
},
{
"t_s": 55,
"label": "HOST: berth carriage extending"
},
{
"t_s": 78,
"label": "HOST: carriage at release position"
},
{
"t_s": 95,
"label": "HOST: capture petals released"
},
{
"t_s": 110,
"label": "HOST: GO for departure"
},
{
"t_s": 13647.669919903823,
"label": "HOST: capture petals armed - capture box active"
},
{
"t_s": 13757.669919903823,
"label": "HOST: berth carriage retracting - hard berth"
},
{
"t_s": 13785.669919903823,
"label": "HOST: hard latch confirmed"
},
{
"t_s": 13807.669919903823,
"label": "HOST: umbilical mated - charging"
},
{
"t_s": 13829.669919903823,
"label": "DRONE: thrusters safed - sortie complete"
}
],
"berth": {
"extend_t_s": 55,
"retract_t_s": 13757.669919903823,
"span_s": 22
},
"anomaly": {
"present": true,
"panel": "radiator-2"
},
"scan_stations": [
{
"k": 0,
"t_s": 2454.7,
"r_hill_m": [
-14.142,
28.284,
-7.071
]
},
{
"k": 1,
"t_s": 3172.1,
"r_hill_m": [
0,
40,
0
]
},
{
"k": 2,
"t_s": 3889.5,
"r_hill_m": [
14.142,
28.284,
7.071
]
},
{
"k": 3,
"t_s": 4606.9,
"r_hill_m": [
20,
0,
10
]
},
{
"k": 4,
"t_s": 5324.2,
"r_hill_m": [
14.142,
-28.284,
7.071
]
},
{
"k": 5,
"t_s": 6041.6,
"r_hill_m": [
0,
-40,
0
]
},
{
"k": 6,
"t_s": 6759,
"r_hill_m": [
-14.142,
-28.284,
-7.071
]
},
{
"k": 7,
"t_s": 7476.4,
"r_hill_m": [
-20,
0,
-10
]
},
{
"k": 8,
"t_s": 8193.7,
"r_hill_m": [
-14.142,
28.284,
-7.071
]
},
{
"k": 9,
"t_s": 8911.1,
"r_hill_m": [
0,
40,
0
]
},
{
"k": 10,
"t_s": 9628.5,
"r_hill_m": [
14.142,
28.284,
7.071
]
},
{
"k": 11,
"t_s": 10345.9,
"r_hill_m": [
20,
0,
10
]
}
]
}
}